 |
| Quantity: | |
|---|---|
WJ-6, WJ-8, WJ-9
TOPS RECYCLING
Brief Introduction:
This Auto Feeding and auto Discharging Used Rubber Tyre Recycling Pyrolysis Plant is applied to process the tyre / plastic/rubber scraps into liquid fuel oil, which achieves the high efficiency continuous production with great safety, zero environment pollution performance, good society effect result and economic benefit
Working Flow:
Firstly, two or three workers feed the raw material into the reactor, seal the feed inlet, and then burn the coal /wood at the bottom of the furnace. The waste raw material in the reactor will be heated slowly. The oil steam will be produced when the temperature reaches 180°C-400°C. And then the oil steam will be separate to light component and heavy component by separate device. The light component will enter into the condenser and meanwhile the residues will be discharged automatically in succession. After cooling, the liquefied part will be crude oil, and the waste gas (this part cannot be liquefied) will return to heating supply system to be burned by combustion gas purification.
Final outputs from Pyrolysis Plant
NO. | Name | Percentage | Usage |
1 | Tyre oil | 45% | * can be sold directly. * make diesel and gasoline by using oil distillation machine. * can be as fuel. |
2 | Carbon black | 30% | * can be sold directly. * make fine carbon by using carbon black refining machine. * make pellet by using carbon pelleting machine. |
3 | Steel wire | 15% | * can be sold directly. * make steel bloom by using hydraulic press-packing |
4 | Oil gas | 10% | * can be as fuel burn by using gas burn system (pyrolysis machine included) * extra gas also can be storage as fuel for other heating. |
Name | Oil Yield Percentage |
PE | 95% |
PP | 90% |
PS | 90% |
ABS | 40% |
Plastic Cable | 80% |
Plastic Bag | 50% |
Leftovers of Paper | Wet 15-20%, Dry 60% |
House Garbage | 30-50% |
Submarine Cable | 75% |
PVC | Not Suitable |
PET | Not Suitable |
Brief Introduction:
This Auto Feeding and auto Discharging Used Rubber Tyre Recycling Pyrolysis Plant is applied to process the tyre / plastic/rubber scraps into liquid fuel oil, which achieves the high efficiency continuous production with great safety, zero environment pollution performance, good society effect result and economic benefit
Working Flow:
Firstly, two or three workers feed the raw material into the reactor, seal the feed inlet, and then burn the coal /wood at the bottom of the furnace. The waste raw material in the reactor will be heated slowly. The oil steam will be produced when the temperature reaches 180°C-400°C. And then the oil steam will be separate to light component and heavy component by separate device. The light component will enter into the condenser and meanwhile the residues will be discharged automatically in succession. After cooling, the liquefied part will be crude oil, and the waste gas (this part cannot be liquefied) will return to heating supply system to be burned by combustion gas purification.
Final outputs from Pyrolysis Plant
NO. | Name | Percentage | Usage |
1 | Tyre oil | 45% | * can be sold directly. * make diesel and gasoline by using oil distillation machine. * can be as fuel. |
2 | Carbon black | 30% | * can be sold directly. * make fine carbon by using carbon black refining machine. * make pellet by using carbon pelleting machine. |
3 | Steel wire | 15% | * can be sold directly. * make steel bloom by using hydraulic press-packing |
4 | Oil gas | 10% | * can be as fuel burn by using gas burn system (pyrolysis machine included) * extra gas also can be storage as fuel for other heating. |
Name | Oil Yield Percentage |
PE | 95% |
PP | 90% |
PS | 90% |
ABS | 40% |
Plastic Cable | 80% |
Plastic Bag | 50% |
Leftovers of Paper | Wet 15-20%, Dry 60% |
House Garbage | 30-50% |
Submarine Cable | 75% |
PVC | Not Suitable |
PET | Not Suitable |
